BS SİNEKLİK - PERDE SİSTEMLERİ

English EN
0541 495 76 22

Pleated Insect Screen

An insect screen with pleated mesh that folds like an accordion and gathers to the side. Suitable for wide openings and balcony doors.

Pleated Insect Screen

A pleated insect screen works by folding a specially pleated mesh along the side profile like an accordion. As it needs no roller cassette, the head height is low and the closed system becomes a slim profile. When not in use it gathers to the side and does not block the view.

The system is carried by a vertical profile that runs on bottom and top rails. The bottom rail is designed slim so that it does not become a trip hazard; in threshold-free installations, ease of passage is preserved. Stitched cords in the pleat structure ensure that the mesh gathers in the same alignment every time it is opened.

It is made as a single sash or a double sash (opening from the middle). Double sashes are preferred for wide openings: each sash travels a shorter distance and the load on the mechanism is balanced. Production is made to measure and on-site measuring is free of charge.

Where It Is Used

Pleated insect screens are most often chosen for balcony doors, terrace exits and wide sliding frames. On doors used frequently, they open and close in a single movement, which makes them very comfortable to use. As they become a slim profile when closed, they can also be fitted into narrow wall recesses.

They can be used on windows as well; however, for window openings a fixed-frame or roller insect screen is usually the more economical solution. The system is chosen according to the size of the opening and how often it is used.

Measuring and Installation

Measurements are taken from the clear opening of the frame. The width is measured at three points (top, middle, bottom) and the height at two points, and the smallest values are used; since frames can differ by a few millimetres, this check is important.

The mounting surface may be a PVC, aluminium or timber frame. Screw points and fixing brackets vary with the surface. Seating the bottom rail level with the threshold is decisive for the sash to move with the same tension along its full height.

The site measurements are sent to the workshop, where the frame and mechanism are assembled; the system arrives on site ready to install.

Use and Maintenance

The life of a pleated mesh depends on the sash being fully opened and closed every time. If sashes are left half-way, the pleats may gather unevenly over time. When pulling the sash, hold it by the handle profile and do not press directly on the mesh.

Dust and sand collecting in the bottom rail are the most common cause of stiff movement. Sweeping or vacuuming the rail once a month is sufficient. The mesh can be wiped with a damp cloth; cleaners containing solvents should not be used.

Key Features

  • Pleated mesh that folds to the side
  • Low head height
  • Single or double sash
  • Slim bottom rail, low trip risk
  • Made-to-measure production

Frequently Asked Questions

Does a pleated insect screen sag on wide doors?

For wide openings, a double sash (opening from the middle) is made instead of a single sash. This shortens the travel of each sash, keeps the pleats gathering neatly and balances the load on the mechanism. The right sash layout is decided during measuring.

Is the bottom rail a trip hazard at the threshold?

In pleated systems the bottom rail is made from a slim profile and does not create a noticeable step on the walking surface. Where a threshold-free passage is required, the rail type is chosen accordingly. A level mounting surface is important for the rail to sit evenly along its full length.

Should I choose a single or a double sash?

The decision depends on the width of the opening and how it is used. A single sash is enough for narrow openings. For wide balcony and terrace doors a double sash is preferred, as it shortens the travel distance and makes passing through with one hand easier. We assess this together during measuring.

Do I need to replace my existing frame?

No. A pleated insect screen is mounted onto your existing PVC, aluminium or timber frame; the frame is not altered. It is fixed to the frame, using brackets and screws suitable for the surface.

Should I take the measurements myself?

On-site measuring is free of charge in Kayseri and in all areas we serve. For orders from abroad and from dealers, you can send us the measurements yourself; in that case, please measure the width at three points and the height at two points and give us the smallest values.

WhatsApp
Message Now
Call Now
0541 495 76 22