BS SİNEKLİK - PERDE SİSTEMLERİ

English EN
0541 495 76 22

Pleated Blinds

A blind system with pleated fabric that folds like an accordion and can be positioned from the top and from the bottom.

Pleated Blinds

A pleated blind works by folding pleated fabric like an accordion along guide cords. When raised it becomes a narrow band, so it covers only a very small part of the window.

The most distinctive feature of the system is that the bottom and top rails can move independently. This means the upper part of the window can be left open while the lower part is covered, letting daylight in while preserving privacy. This is particularly useful on ground floors and façades facing the street.

The fabric is chosen by light transmission; sheer, dim-out and blackout options are available. The system is made to measure and on-site measuring is free of charge.

Light and Privacy Control

What sets the pleated blind apart is that its position on the window can be chosen freely. By raising the bottom rail, the lower half of the window can be covered; as the upper part stays open, the room continues to receive daylight.

This is preferred in street-level flats and in spaces such as clinics and offices that need both light and privacy. With blackout fabric, it is suitable for rooms such as bedrooms and meeting rooms where light needs to be shut out completely.

Fabric Selection

Fabrics fall into three main groups according to light transmission. Sheer fabrics soften incoming light without blocking the view completely. Dim-out fabrics reduce light noticeably and provide privacy during the day. Blackout fabrics block the most light.

The orientation of the room is decisive: south- and west-facing façades receive strong light all day, so dim-out or blackout is usually chosen. On north-facing façades sheer fabric may be enough.

Installation and Measuring

A pleated blind can be mounted on the window sash or on the wall. When mounted on the sash, the blind moves with the sash and does not swing when the window is opened; as it runs close to the glass, light leakage is also reduced.

Measurements are taken differently depending on the mounting type: for sash mounting the glass area is used, for wall mounting the desired coverage area. For this reason, the mounting type is agreed before measuring.

Key Features

  • Pleated fabric folding like an accordion
  • Independent bottom and top rails
  • Sheer, dim-out and blackout fabrics
  • Narrow band when raised
  • Made-to-measure production

Frequently Asked Questions

Can I open the blind from both the bottom and the top?

Yes. In a pleated blind the bottom and top rails move independently. You can position the blind from the bottom up or from the top down and cover only the part of the window you want.

Will the blind swing when I open the window?

When mounted on the window sash, the blind moves with the sash and does not swing. With wall or frame-top mounting, the blind stays in place when the window is opened; in that case space must be left for the sash to move.

Which fabric should I choose?

It depends on the orientation of the room and its use. On bright south- and west-facing façades dim-out or blackout is usually best; on north-facing façades sheer fabric is generally enough. Blackout is preferred for bedrooms and presentation rooms.

How is the fabric cleaned?

Pleated fabric is dusted with a vacuum cleaner on a low setting using a soft brush attachment. Stains are spot-cleaned with a damp cloth. The fabric should not be washed or rubbed, as this damages the pleat structure.

WhatsApp
Message Now
Call Now
0541 495 76 22