Fixed-Frame Insect Screen
A framed insect screen fixed to the window opening, with no moving parts. The most economical solution for windows.
A fixed-frame insect screen is the simplest system: mesh tensioned inside a frame profile and fixed to the window opening. It has no rail, rollers, spring or mechanism; with no moving parts, it is also the type least prone to faults.
The frame is fixed to the window frame with clip-on brackets or screwed directly. With clip-on fixing, the frame can easily be removed for cleaning and put back. Mesh tension is set in the workshop by pressing the mesh into the cord channel.
With no moving parts, it costs less than the other systems. It is made to measure and on-site measuring is free of charge.
Where It Is Used
The fixed-frame insect screen is the standard solution for window openings that are not used as passages. It is widely used on bedroom, living room and kitchen windows. When the window sash opens inwards, the screen stays fixed on the outside, so protection continues uninterrupted while airing the room.
It is not suitable for door passages; for doors, a hinged or pleated system should be chosen.
Fixing Options
Two methods are used. With clip-on fixing, the frame sits in brackets attached to the window frame and can be removed by hand; this is practical for cleaning or storage at the end of the season. With screwed fixing, the frame is attached directly to the window frame and is not meant to be removed; it is preferred on façades exposed to high wind loads.
The choice depends on the height of the floor, the direction from which the façade receives wind and your cleaning habits.
Cleaning
With clip-on installations, the frame can be removed and washed. Rinse the mesh with plenty of water, brush it with a soft brush and do not refit it before it is dry. With screwed installations, cleaning is done in place; a damp cloth or low-pressure water is sufficient.
In both cases, avoid cleaners containing solvents; they can damage the coating on the mesh.
Key Features
- No moving parts
- Clip-on or screwed fixing
- Frame removable for cleaning
- Most economical insect screen type
- Made-to-measure production
Frequently Asked Questions
Will the screen get in the way when I open the window?
No. The fixed-frame insect screen is fixed to the outer line of the frame, while the window sash opens inwards. The two work in different planes, so they do not obstruct each other and protection continues while airing.
Can I remove it for cleaning?
If it was installed with clip-on fixing, the frame can be removed by hand, washed and put back. With screwed fixing, the frame is not designed to be removed; cleaning is done in place. We decide which method is suitable during measuring.
Why is it more economical than other systems?
The system has no rail, rollers, spring or retracting mechanism. Fewer materials and less labour mean a lower cost. For the same reason, there are fewer parts that can fail.
Is it safe on high floors?
An insect screen is not a fall barrier and no type should be used for that purpose. On high floors, screwed fixing is preferred because of wind loads. Separate measures such as window locks should be taken for child safety.